After the copper door is installed, it often gives people a sense of style, and it is also the face of the main person. The general installation work has a professional master responsible, everyone understands the installation and precautions of the copper door, you can grasp the future supervision.
Copper door installation precautions
1. Remove the door leaf first, and put the door frame into the door hole to check whether it is square or not with a horizontal ruler and a vertical line. If it is not normal, use a wooden mat to level it.
2. Insert the wood chips in the gap between the door frame and the wall to ensure the stability of the door frame. When installing, the cement mortar should be poured into the door frame. After the cement mortar is solidified and dried, the wood chips from the door seam can be taken out and used. But within 24 hours, try to reduce the number and intensity of opening.
3. Usually, when the copper door is processed and processed, there will be paint treatment on the surface. This step is mainly for protection. The paint on the surface of the copper door has a good protection for the material inside the copper door. Therefore, the process of installing the copper door should be very careful. Do not let hard objects or sharp objects collide with the copper door, otherwise the surface paint will scratch or even fall off. The raw materials will be exposed to the outside for a long time, and react with the oxygen in the air to rust and affect the appearance.
4. Although copper itself is relatively strong in corrosion resistance and oxidation resistance, when installing copper gates, the construction site should try not to have high oxidizing and corrosive chemicals, avoiding direct contact with copper gates. . If you accidentally touch the surface of the product, rinse it off with clean water and dry it with a soft, clean cloth. If necessary, it can be sprayed on the copper door surface for cleaning and maintenance.
5. The new copper door surface usually has a layer of peritoneal paper to protect the product. Do not rush to remove the peritoneal paper during installation to avoid damage to the door. For example, when the wall is being decorated, the chemicals such as cement and paint that have been dropped on the wall are stained on the copper door, and it is easy to get black spots to rust after a long time. The lower frame of the copper door should also be protected, and the U-shaped groove can be made of wood.
6. If there is a wall to be cleaned, the door should be sealed with a plastic film before cleaning the wall. In particular, some decorative materials are special, such as marble walls. When cleaning, chemicals such as oxalic acid are used to seriously damage the product, so this kind of material cannot be exposed to the copper door surface.
7. In order to avoid the cling film will adhere to the copper door, the plastic wrap should be removed in time after the installation is completed. In order not to affect the appearance, try to process it within 30 days.
8. Do not apply various greases in the keyhole to avoid blockage of the keyhole. If there is a problem that the door leaf cannot be opened normally or other copper door is affected, please contact the after-sales service department of the manufacturer.
9, copper doors should generally try to avoid direct exposure to rain and sunlight, otherwise the frequency is too high, will shorten the appearance of the copper door.
The above is the place to pay attention to the installation of the copper door, mainly the details of the problem, I hope to help everyone.